Product ID:HEAT SHRINKABLE INTERCONNECTIONS WITH SOLDER FOR HIGH TEMPER
MSDS Date:10/01/1994
FSC:5940
NIIN:01-136-2540
MSDS Number: CFKGP

RAYCHEM CORP

300 CONSTITUTION DRIVE
MENLO PARK, CA 94025-1164
US

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 415-361-5524/3485

Preparer: DONNA SEID

Cage: 06090

RAYCHEM CORP

MENLO PARK, CA 94025-1164 US

Telephone: 415-361-4907

Cage: 06090

POLYETHYLENE COPOLYMER

CAS: 9010-77-9

OLEFIN COPOLYMER

FLUOROPOLYMERS

CHLOROPOLYMERS

POLYAMIDES

POLYESTERS

SILICONES

SOLDER

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROPER INSTALLATION OF THIS PRODUCT
CREATES NO KNOWN ACUTE OR CHRONIC HEALTH HAZARDS. SKIN OR EYE
CONTACT WITH MOLTEN MATERIAL MAY CAUSE THERMAL BURNS. THERE IS
INSUFFICIENT INFORMATION AVAILABLE TO P REDICT THE EFFECTS FOR
INGESTION. INHALATION OF DECOMPOSITION PRODUCTS MAY BE TOXIC &
SHOULD NOT BE INHALED.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:SKIN/EYES-THERMAL BURNS IF MATERIAL IS
MOLTEN/MELTS. DECOMPOSITION PRODUCTS MAY BE TOXIC IF INHALED.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING EYES,
SKIN, RESPIRATORY DISORDERS MAY BE MORE SUSCEPTIBLE TO THE EFFECTS
OF THE VAPORS FROM DECOMPOSITION.

First Aid:EYES-FLUSH WITH WATER FOR 15 MINUTES, LIFT LIDS. SKIN-IF
BURNED FROM MOLTEN MATERIAL, COOL BY FLUSHING WITH COOL WATER. DO
NOT ATTEMPT TO REMOVE FROM SKIN! TREAT AS BURN & GET IMMEDIATE
MEDICAL ATTENT ION. INHALED-IF RESPIRATORY SYMPTOMS OCCUR, REMOVE
TO FRESH AIR. INGESTED-IF SWALLOWED & SYMPTOMS OCCUR, SEEK MEDICAL
ATTENTION.

Extinguishing Media:WATER FOG, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS AND FULL FIRE FIGHTER'S PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY EVOLVE IN A FIRE.

Spill Release Procedures:SWEEP UP & COLLECT IN SUITABLE CONTAINER FOR
DISPOSAL OR REUSE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID ANY VAPORS GIVEN OFF DURING
THERMAL DECOMPOSITION.AVOID CONTACT WITH MOLTEN MATERIAL.DO NOT
CONSUME FOOD,DRINK OR TOBACCO PRODUCTS IN WORK AREA.
Other Precautions:WASH HANDS BEFORE EATING, DRINKING OR SMOKING. AVOID
HEATING BEYOND TEMPERATURES REQUIRED FOR NORMAL INSTALLATION. SEE
INSTALLATION INSTRUCTIONS FOR PROPER PROCEDURES. IF PRODUCT CHARS
OR BURNS, STOP HEATING IMMEDIATELY.

Respiratory Protection:IF INSTALLATION OCCURS IN AN CONFINED,
UNVENTILATED AREA, NIOSH/MSHA- APPROVED RESPIRATORS ARE
RECOMMENDED.
Ventilation:IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE, ENSURE ADEQUATE
VENTILATION DURING INSTALLATION.
Protective Gloves:IF MOLTEN:HEAT RESISTANT GLOVES.
Eye Protection:IF MOLTEN: FACESHIELD/GOGGLES.
Other Protective Equipment:IF IT IS NECESSARY TO HANDLE GROSSLY
OVERHEATED OR FIRE DAMAGED PRODUCTS,WEAR NATURAL RUBBER GLOVES.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

HCC:N1
Spec Gravity:6.0-11.0 G/CC
Evaporation Rate & Reference:NOT APPLICABLE.
Solubility in Water:INSOLUBLE.
Appearance and Odor:CLEAR OR BLUE TRANSPARENT PLASTIC SLEEVES WITH A
RING OF SOLDER INSERT. NO ODOR

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:THIS PRODUCT IS STABLE UNDER NORMAL
CONDITIONS. AVOID OVERHEATING OF PRODUCT.
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON
DIOXIDE,ALDEHYDES,ACETIC ACID,LOW MOLECULAR WEIGHT
HYDROCARBONS,SILICON DIOXIDE,HYDROGEN CHLORIDE
Conditions to Avoid Polymerization:WILL NOT OCCUR. NO KNOWN
POLYMERIZATION CONDITIONS TO AVOID.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS. IF THERE LOCAL REGULATIONS ON
THE CONTROLLED INCINERATION OF CHLORINATED HYDROCARBONS, THEN ALL
HALOGENTED PRODUCTS WI LL BE SUBJECT TO THOSE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.